The HELIBURReffortlessly repairs damaged bolts so you can thread nuts in place,so you don't have to waste time and labor filing threads by hand ever again!
As the old adage goes:Work smarter, not harder!
The HELIBURR is a tool bit that simplifies the repair process, drastically shortening repair time, as well as bypassing the need to replace expensive or hard to find hardware while keeping safety at a previously unattainable level.
This tool works by way of shearing metal layer by layer. So there are some important things to know about using the HELIBURR. The most important thing to know is this: THE SLOWER THE BETTER. Using the lowest speed on your drill (50-400 RPMs), apply decent pressure and the tool will do the rest. Remember that we’re not making metal pencils; We’re removing damaged threads to allow an easy nut start. Remove only the amount of material from the work piece that you need, and you will preserve the life of your HELIBURR.
Most repairs only require removing a single thread. The HELIBURR is a cutter, and just like a drill bit it will reach the end of life depending on how you use the tool. Slow speed along with no unnecessary cutting and the use of cutting oil or another lubricant will bring your HELIBURRlong life. Refrain from turning every work piece into a pencil, and you’ll keep the HELIBURRcutting edge sharp for much longer.
How To Use:
Simply take your tool bit and attach it to your drill, just like you would a regular drill bit
Then position the Tool over and onto the exposed damaged/ rusted bolt
Start your drill (on its lowest speed) while applying some pressure
And perform this action until your bolt is perfectly sheared and smoothed to your liking!
Effective up to Grade 8 SAE
Fits size 8-32 bolts (.164) up to 3/4″-10 (.750) - (4mm -19mm)
100% Satisfaction Guaranteed
We ship to 127 countries, including US, CA, AU and all countries in Europe.